Union belge pour l'Agrément technique de la construction Nederlands | Français | English Contact
UBatc

Approval in the spotlight

ATG 13/H913

FACADES - PRODUITS POUR FACADES OU VERRE
ATG H profine compounds

profine Belux bvba

Registration newsletter

To be continuously up to date as regards recently issued UBAtc technical approvals and news related to quality declarations issued by UBAtc and those in which UBAtc operators are involved, users may subscribe for the UBAtc newsletter (which will only be issued in Dutch and French). The first issue of the newsletter will be distributed shortly by e-mail to those that subscribed. The service through which printed versions of the approval texts were distributed against payment will be terminated.

Abonneren op de nieuwsbrief

Welcome
The UBAtc is Belgium's only authority offering technical approval of construction materials, products, systems and installers.

The main deliverables of our work are national and European technical approvals for materials, products and systems. Whereas European technical approvals (ETA) are strictly limited to the regulatory environment and European directive 89/106/EEC, the national technical approvals (ATG) are voluntary assessments, covering both regulated and other characteristics, demonstrating the fitness for the intended use.

As a rule, national technical approvals require certification according to ISO system 5, performed by certification bodies assigned by the UBAtc, while conformity assessment for European technical approvals corresponds with the systems laid down in European Commission Decisions, where relevant performed by third parties recognized by their member state and notified under article 18 of directive 89/106/EEC.


News

2017-11-07

In October 2015, UEAtc unanimously elected its new President, Mr. Benny De Blaere, director of the BCCA (the Belgian Construction Certification Association).

During its previous meeting on 18 and 19 October 2017, in the premises of NSAI (National Standards Authority of Ireland) in Dublin, the Coordination Commission of UEAtc took the decision to prolong the mandate of Mr De Blaere for another 2 years. 

The General secretariat, UBAtc (Belgium), has also been confirmed unanimously for another mandate of 5 years.


2016-12-01
The first “Innovatie ID innovation” (IIDI) are now available online. This new simplified assessment procedure for very innovative products has been set up on the demand of the Walloon Region, but is now extended to other Regions. The declarations of suitability for use IIDI for innovations are part of the process aiming to obtain a full technical agreement ATG.

2016-11-02
The approval operator designated by the UBAtc, BCCA, has decided to set up a new Specialized Group for the treatment of approval dossiers related to exterior insulation systems. These dossiers were previously treated in the Specialized Groups "Finishing" and "Facades".
This new Specialized Group meets for the first time on 23 November 2016.
The Specialized group is composed by representatives of the concerned stakeholders in the sector.

2016-07-05
In accordance with Belgian legislation, the Belgian designating authority, the Federal Public Service Economy, extended the designation of UBAtc as a Technical assessment body in the framework of Regulation (EU) N° 305/2011.

2016-07-01

2016-02
Newsletter UBAtc News (in Dutch #01/2016 and French #01/2016 only)

2013-07-15
On 15 July 2013, UBAtc was designated by the Belgian Federal Public Services Economy as Technical Assessment Body in the framework of Regulation (EU) N° 305/2011. Since 16 September 2013, applying for a European Technical Assessment through UBAtc is possible. The European Technical Assessment is the alternative route allowing manufacturers to CE mark products in the absence of a harmonized standard. You may find information regarding applications in the UBAtc’s European Technical Assessment Regulation.

2013-06
Newsletter UBAtc News (in Dutch #01/2013 and French #01/2013 only)

2012-10-01
Taking into account the transition from the Construction Products Directive 89/106/EEC to the Construction Products Regulation (EU) 305/2011, causing a significant change for European Technical Approvals (see relevant information sheet), new application forms apply from 1 October 2012 onwards. Separate application forms are foreseen for applications in the framework of the Construction Products Directive 89/106/EEC or the Construction Products Regulation (EU) 305/2011 and all other applications.

2011-10-28
The Flemish Region confirms that from 1 July 2012 onwards, subsidies for post-insulation of cavity walls with in-situ insulation products will be granted if conformity of the works with the relevant STS is demonstrated. The UBAtc’s approval scheme for post-insulation of cavity walls with in-situ insulation products, announced in July 2011 by approval operator BCCA, provides one of the possible ways of demonstrating conformity. It is important that manufacturers and installers introduce their application several months before 1 July 2012 to be able to be on time.

2011-07-01
Having been approved by the UBAtc Board of directors, the modified approval and certification regulations apply (referenced texts in French only, English version not yet available)

2011-06-06
UBAtc Board of directors welcomes 3 new adherent members

2010-08-24
UBAtc operator BCCA launches new approach for approvals for in situ sprayed PUR for floors (referenced texts in French only)

2010-07-01
Having been approved by the UBAtc Board of directors, the new approval and certification regulations apply (referenced texts in French only, English version not yet available)

2010-06-22
UBAtc Board of directors welcomes 6 new adherent members

2009-12-01
UBAtc notified as EOTA member

2009-11-01
UBAtc asbl starts work

2009-10-28
The (effective) members of the UBAtc sign the Statutes (referenced text in French only)